Send comments to nx5000-docfeedback@cisco.com
6-105
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show mac access-lists
show mac access-lists
To display all Media Access Control (MAC) access control lists (ACLs) or a specific MAC ACL, use the
show mac access-lists command.
show mac access-lists [access-list-name]
Syntax Description
Command Default The switch shows all MAC ACLs, unless you use the access-list-name argument to specify an ACL.
Command Modes EXEC mode
Command History
Examples This example shows how to display all MAC ACLs on the switch:
switch# show mac access-lists
Related Commands
access-list-name (Optional) Name of a MAC ACL to show.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
mac access-list Configures a MAC ACL.
show access-lists Displays all ACLs or a specific ACL.
show ip access-lists Displays all IPv4 ACLs or a specific IPv4 ACL.
To Next Page
Loading...
