Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-114
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
port-security distribute
port-security distribute
To enable Cisco Fabric Services (CFS) distribution for port security, use the port-security distribute
command. To disable this feature, use the no form of the command.
port-security distribute
no port-security distribute
Syntax Description This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the port-security commit command.
Examples The following example shows how to distribute the port security configuration to the fabric:
switch(config)# port-security distribute
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
port-security commit Commits the port security configuration changes to the active configuration.
show port-security Displays port security information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English