Send comments to nx5000-docfeedback@cisco.com
8-51
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcdomain distribute
fcdomain distribute
To enable fabric distribution using Cisco Fabric Services (CFS), use the fcdomain distribute command.
To disable fabric distribution using CFS, us the no form of the command.
fcdomain distribute
no fcdomain distribute
Syntax Description This command has no arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Examples The following example enables fabric distribution using CFS:
switch(config)# fcdomain distribute
The following example disables fabric distribution using CFS:
switch(config)# no fcdomain distribute
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fcdomain Configures Fibre Channel domain features.
show fcdomain Displays global information about the Fibre Channel domain configurations.
To Next Page
Loading...
