Send comments to nx5000-docfeedback@cisco.com
7-27
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show logging level
show logging level
Use the show logging level command to display the facility logging severity level configuration.
show logging level [facility]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the EtherChannel logging severity level configuration:
switch# show logging level port-channel
Related Commands
facility (Optional) Defines the appropriate logging facility. The facilities are listed
in the System Message Logging Facilities section.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
logging level Configures the facility logging level.
To Next Page
Loading...
