Send comments to nx5000-docfeedback@cisco.com
6-112
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show running-config radius
show running-config radius
To display RADIUS server information in the running configuration, use the show running-config
radius command.
show running-config radius [all]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information for RADIUS in the running configuration:
switch# show running-config radius
Related Commands
all (Optional) Displays default RADIUS configuration information.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show radius-server Displays RADIUS information.
To Next Page
Loading...
