Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-11
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
clear access-list counters
clear access-list counters
To clear the counters for all IPv4 access control lists (ACLs) or a single IPv4 ACL, use the clear
access-list counters command.
clear access-list counters [access-list-name]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to clear counters for all IPv4 ACLs:
switch# clear access-list counters
This example shows how to clear counters [for an IPv4 ACL named acl-ipv4-01:
switch# clear access-list counters acl-ipv4-01
Related Commands
access-list-name (Optional) Name of the IPv4 ACL whose counters the switch clears.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
access-class Applies an IPv4 ACL to a VTY line.
ip access-group Applies an IPv4 ACL to an interface.
ip access-list Configures an IPv4 ACL.
show access-lists Displays information about one or all IPv4, IPv6, and MAC ACLs.
show ip access-lists Displays information about one or all IPv4 ACLs.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English