Send comments to nx5000-docfeedback@cisco.com
3-14
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show monitor session
show monitor session
To display information about the SPAN sessions, use the show monitor session command.
show monitor session [session | all [brief] | range range [brief] | status]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about SPAN session 1:
switch# show monitor session 1
This example shows how to display a range of SPAN sessions:
switch# show monitor session range 1-4
Related Commands
session (Optional) Number of the session; valid values are from 1 to 18.
all (Optional) Displays all sessions.
brief (Optional) Displays a brief summary of the information.
range range (Optional) Displays a range of sessions; valid values are from 1 to 18.
status (Optional) Displays the operational state of all sessions.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
monitor session Displays the contents of the startup configuration file.
To Next Page
Loading...
