Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-98
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show aaa authentication
show aaa authentication
To display AAA authentication configuration information, use the show aaa authentication command.
show aaa authentication login [error-enable | mschap]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the configured authentication parameters:
switch# show aaa authentication
This example shows how to display the authentication login error enable configuration:
switch# show aaa authentication login error-enable
This example shows how to display the authentication login MSCHAP configuration:
switch# show aaa authentication login mschap
error-enable (Optional) Displays the authentication login error message enable
configuration.
mschap (Optional) Displays the authentication login MS-CHAP enable
configuration.
Release Modification
4.0(0)N1(1a) This command was introduced.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English