Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-102
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show ip access-lists
show ip access-lists
To display all IPv4 ACLs or a specific IPv4 ACL, use the show ip access-lists command.
show ip access-lists [access-list-name]
Syntax Description
Command Default The switch shows all IPv4 ACLs, unless you use the access-list-name argument to specify an ACL.
Command Modes EXEC mode
Command History
Examples This example shows how to display all IPv4 ACLs on the switch:
switch# show ip access-lists
Related Commands
access-list-name (Optional) Name of an IPv4 ACL to show.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ip access-list Configures an IPv4 ACL.
show access-lists Displays all ACLs or a specific ACL.
show mac access-lists Displays all MAC ACLs or a specific MAC ACL.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English