Send comments to nx5000-docfeedback@cisco.com
7-26
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show logging last
show logging last
Use the show logging last command to display the last number of lines of the logfile.
show logging last number
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the last 42 lines of the log file:
switch# show logging last 42
number Enters the number of lines to display from 1 to 9999.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
