Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
7-28
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show logging logfile
show logging logfile
Use the show logging logfile command to display the messages in the log file that were timestamped
within the span entered. If you do not enter an end time, the current time is used.
show logging logfile [start-time yyyy mmm dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the messages in the log file that were timestamped within the span
shown:
switch# show logging logfile start-time 2008 mar 11 12:10:00
Related Commands
start-time (Optional) Enter a start time in the format yyyy mmm dd hh:mm:ss. Use three
characters for the month (mmm) field, digits for the year (yyyy) and day (dd)
fields, and digits separated by colons for the time (hh:mm:ss) field.
end-time (Optional) Enter an end time in the format yyyy mmm dd hh:mm:ss. Use three
characters for the month (mmm) field, digits for the year (yyyy) and day (dd)
fields, and digits separated by colons for the time (hh:mm:ss) field.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
logging logfile Configures logging to a log file.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English