Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
6-113
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show running-config security
show running-config security
To display user account, SSH server, and Telnet server information in the running configuration, use the
show running-config security command.
show running-config security [all]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display user account, SSH server, and Telnet server information in the
running configuration:
switch# show running-config security
all (Optional) Displays default user account, SSH server, and Telnet server
configuration information.
Release Modification
4.0(0)N1(1a) This command was introduced.