Send comments to nx5000-docfeedback@cisco.com
1-69
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
save
save
To save the current configuration session to a file, use the save command.
save location
Syntax Description
Command Default None
Command Modes Session configuration mode
Command History
Examples This example shows how to save a configuration session to a file in bootflash:
switch# configure session MySession
switch(config-s)# save bootflash:sessions/MySession
Related Commands
location Location of the file. The location can be in bootflash or volatile. The file
name can be any alphanumeric string up to 63 characters.
Release Modification
4.0(1a)N1(1) This command was introduced.
Command Description
configure session Creates or modifies a configuration session.
delete Deletes a file from a location.
To Next Page
Loading...
