Cisco AP775A - Nexus Converged Network Switch 5010 - Clear Install Failure-Reason

Send comments to nx5000-docfeedback@cisco.com
1-9
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
clear install failure-reason
clear install failure-reason
To clear the reason for software installation failures, use the clear install failure-reason command.
clear install failure-reason
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to clear the reason for software installation failures:
switch# clear install failure-reason
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show install all Displays status information for the software installation.