Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-96
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show processes log
show processes log
To display the contents of the process log, use the show processes log command.
show processes log [details | pid process-id]
Syntax Description
Command Default Displays summary information for all processes on the device.
Command Modes EXEC mode
Command History
Examples This example shows how to display summary information from the process log:
switch# show processes log
This example shows how to display detailed information from the process log:
switch# show processes log details
This example shows how to display detailed information from the process log for a specific process:
switch# show processes log pid 3632
Related Commands
details (Optional) Displays detailed information from the process log.
pid process-id (Optional) Displays detailed information from the process log for a specific
process. The process ID range is from 1 to 2147483647.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show processes Displays the process information for the switch.
show processes cpu Displays the CPU utilization information for processes.
show processes
memory
Displays the memory allocation information for processes.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English