Send comments to nx5000-docfeedback@cisco.com
1-107
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show system uptime
show system uptime
To display the amount of time since the last system restart, use the show system uptime command.
show system uptime
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the amount of time since the last system restart:
switch# show system uptime
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
