Send comments to nx5000-docfeedback@cisco.com
1-54
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
line vty
line vty
To specify the virtual terminal and enter line configuration mode, use the line vty command.
line vty
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Interface configuration mode
Command History
Examples This example shows how to enter console port configuration mode:
switch# configure terminal
switch(config)# line vty
switch(config-line)#
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
exec-timeout Configures the inactive terminal timeout for a port.
session-limit Configures the maximum number of the concurrent virtual terminal sessions.
show line Displays information about the console port configuration.
To Next Page
Loading...
