Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
9-40
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show rlir
show rlir
To display Registered Link Incident Report (RLIR) information, use the show rlir command.
show rlir {erl [vsan vsan-id] | history | recent {interface fc slot/port | portnumber port} |
statistics [vsan vsan-id]}
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays RLIR information for VSAN 1:
switch# show rlir erl vsan 1
The following example displays RLIR statistics:
switch# show rlir statistics vsan 1
erl Displays the Established Registration List.
vsan vsan-id (Optional) Specifies a VSAN ID. The range is 1 to 4093.
history Displays the link incident history.
recent Displays recent link incidents.
interface fc slot/port Specifies a Fibre Channel interface.
portnumber port Displays RLIR information for the specified port number.
statistics Displays RLIR statistics for all VSANs or the specified VSAN.
Release Modification
4.0(0)N1(1a) This command was introduced.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English