Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-141
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
telnet server enable
telnet server enable
To enable the Telnet server, use the telnet server enable command. To disable the Telnet server, use the
no form of this command.
telnet server enable
no telnet server enable
Syntax Description This command has no arguments or keywords.
Command Default Enable.
Command Modes Configuration mode
Command History
Examples This example shows how to enable the Telnet server:
switch(config)# telnet server enable
This example shows how to disable the Telnet server:
switch(config)# no telnet server enable
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show telnet server Displays the Telnet server status.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English