Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
1-103
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show startup-config
show startup-config
To display the startup configuration, use the show startup-config command.
show startup-config
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the startup configuration:
switch# show startup-config
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
copy running-config
startup-config
Copies the running configuration to the startup configuration.
show running-config Displays the running-configuration.
show running-config
diff
Displays the differences between the running configuration and the startup
configuration.