Send comments to nx5000-docfeedback@cisco.com
3-4
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show interface switchport
show interface switchport
To display information about all the switch port interfaces, use the show interface switchport
command.
show interface switchport
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information for all Ethernet interfaces:
switch# show interface switchport
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
switchport access vlan Sets the access VLAN when the interface is in access mode.