Send comments to nx5000-docfeedback@cisco.com
8-32
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
device-alias name
device-alias name
To configure device names in the device alias database, use the device-alias name command. To remove
device names from the device alias database, use the no form of the command.
device-alias name device-name pwwn pwwn-id
no device-alias name device-name
Syntax Description
Command Default None
Command Modes Device alias database configuration mode
Command History
Examples The following example shows how to configure a device name alias entry in the device name database:
switch(config)# device-alias database
switch(config-device-alias-db)# device-alias name Device1 pwwn 21:00:00:20:37:6f:db:bb
Related Commands
device-name Specifies the device name. Maximum length is 64 characters.
pwwn pwwn-id Specifies the pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h
is a hexadecimal number.
Release Modification
Release 4.0 This command was introduced.
Command Description
device-alias database Enters device alias database configuration mode.
show device-alias Displays device alias database information.
To Next Page
Loading...
