Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
4-19
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show interface fex-intf
show interface fex-intf
To display the host interfaces pinned to a fabric interface, use the show interface fex-intf command.
show interface interface fex-intf
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the host interfaces pinned to an Ethernet fabric interface on the
parent switch:
switch# show interface ethernet 1/1 fex-intf
This example shows how to display the host interfaces pinned to an EtherChannel fabric interface on the
parent switch:
switch# show interface port-channel 1 fex-intf
Related Commands
interface Ethernet or EtherChannel interface.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
show fex Displays all configured Fabric Extender chassis connected to the switch.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English