Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
6-117
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show startup-config radius
show startup-config radius
To display RADIUS configuration information in the startup configuration, use the show startup-config
radius command.
show startup-config radius
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the RADIUS information in the startup configuration:
switch# show startup-config radius
Release Modification
4.0(0)N1(1a) This command was introduced.