Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-14
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
clear fcdomain
clear fcdomain
To clear the entire list of configured hosts, use the clear fcdomain command.
clear fcdomain session vsan vsan-id
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command clears only the list of configured hosts. Existing connections are not terminated.
Examples The following example shows how to clear the entire list of configured hosts for remote capture:
switch# clear fcdomain
Related Commands
session Clears session information.
vsan vsan-id Clears Fibre Channel domains for a specified VSAN ranging from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fcdomain Displays the list of hosts configured for a remote capture.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English