Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-110
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show version
show version
To display information about the software version, use the show version command.
show version [fex chassis_ID | image filename]
Syntax Description
Command Default Displays software version information for the running kickstart and system images.
Command Modes EXEC mode
Command History
Examples This example shows how to display the version information for the kickstart and system image running
on the device:
switch# show version
This example shows how to display the version information for an image file:
switch# show version image bootflash:old_image
This example shows how to display the version information for an attached Fabric Extender:
switch# show version fex 101
fex chassis_ID (Optional) Specifies the Fabric Extender chassis ID. Chassis ID is 100 to
199.
image filename (Optional) Displays the version information for a system or kickstart image
file.
Release Modification
4.0(0)N1(1a) This command was introduced.
4.0(1a)N2(1) This command was modified to provide Fabric Extender support.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English