Send comments to nx5000-docfeedback@cisco.com
4-14
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show environment fex
show environment fex
To display the environmental sensor status, use the show environment fex command.
show environment fex {all | chassis_ID} [temperature | power | fan]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the environmental sensor status for a Fabric Extender:
switch# show environment fex 101
Related Commands
all Show information for all Fabric Extender chassis.
chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
temperature (Optional) Displays temperature sensor information.
power (Optional) Displays power capacity and power distribution information.
fan (Optional) Displays fan information.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
show fex Displays all configured Fabric Extender chassis connected to the switch.
To Next Page
Loading...
