Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-85
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show incompatibility system
show incompatibility system
To display the configuration incompatibilities between the running system image and an earlier system
image prior to downgrading the Cisco NX-OS software, use the show incompatibility system
command.
show incompatibility system {filesystem: //server/ [directory] filename}
Syntax Description
Note There can be no spaces in the filesystem://server/directory/filename string. Individual elements of this
string are separated by colons (:) and slashes (/).
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the configuration incompatibilities:
switch# show incompatibility system bootflash://sup-local/old_image.bin
Related Commands
filesystem: Name of the file system. Valid values are bootflash or volatile.
//server/ Name of the server. Valid values are ///, //module-1/, //sup-1/, //sup-active/,
or //sup-local/. The double slash (//) is required.
directory (Optional) Name of a directory. The directory name is case sensitive.
filename Name of the file to compare with the loaded software image. The filename
is case sensitive.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
install all Installs the kickstart and system images.
reload Reloads the device with new Cisco NX-OS software.
show version Displays information about the software version.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English