Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-20
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
clear fspf counters
clear fspf counters
To clear the Fabric Shortest Path First (FSPF) statistics, use the clear fspf counters command.
clear fspf counters vsan vsan-id [interface type]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines If the interface is not specified, then all of the counters of a VSAN are cleared. If the interface is
specified, then the counters of the specific interface are cleared.
Examples The following example clears the FSPF statistics on VSAN 1:
switch# clear fspf counters vsan 1
The following example clears FSPF statistics in VSAN 1 for the specified Fibre Channel interface:
switch# clear fspf counters vsan 1 interface fc 3/2
Related Commands
vsan Indicates that the counters are to be cleared for a VSAN.
vsan-id The ID of the VSAN is from 1 to 4093.
interface type (Optional). The counters are to be cleared for an interface. The interface
types are fc (Fibre Channel) and san-port-channel (SAN port channel).
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fspf Displays global FSPF information for a specific VSAN.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English