Cisco AP775A - Nexus Converged Network Switch 5010 - Clear Rlir

Send comments to nx5000-docfeedback@cisco.com
8-22
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
clear rlir
clear rlir
To clear Registered Link Incident Report (RLIR) information, use the clear rlir command.
clear rlir {history | recent {interface fc slot/port | portnumber port} | statistics vsan vsan-id}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples The following example shows how to clear RLIR statistics for VSAN 1:
switch# clear rlir statistics vsan 1
Related Commands
history Clears RLIR incident link history.
recent Clears recent link incidents
interface fc slot/port Clears entries for the specified interface
portnumber port Displays the port number for the link incidents
statistics Clears the RLIR statistics.
vsan vsan-id Clears the RLIR statistics for a VSAN. The ID of the VSAN is from 1 to
4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show rlir Displays RLIR information.