Send comments to nx5000-docfeedback@cisco.com
1-39
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
feature interface-vlan
feature interface-vlan
To enable the creation of VLAN interfaces, use the feature interface-vlan command. To disable the
VLAN interface feature, use the no form of this command.
feature interface-vlan
no feature interface-vlan
Syntax Description This command has no arguments or keywords.
Command Default VLAN interfaces are disabled.
Command Modes Configuration mode
Command History
Usage Guidelines You must use the feature interface-vlan or the svi enable command before you can create VLAN
interfaces.
Examples This example shows how to enable the interface VLAN feature on the switch:
switch(config)# feature interface-vlan
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
interface vlan Creates a VLAN interface.
To Next Page
Loading...
