Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
8-31
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
device-alias mode
device-alias mode
To configure device alias enhanced mode, use the device-alias mode command. To remove device alias
enhanced mode, use the no form of the command.
device-alias mode enhanced
no device-alias mode enhanced
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to device alias enhanced mode:
switch(config)# device-alias mode enhanced
Related Commands
enhanced Specifies enhanced mode.
Release Modification
Release 4.0 This command was introduced.
Command Description
device-alias database Enters device alias database configuration mode.
show device-alias Displays device alias database information.