Send comments to nx5000-docfeedback@cisco.com
9-47
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show trunk protocol
show trunk protocol
To display trunk protocol status, use the show trunk protocol command.
show trunk protocol
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays trunk protocol status:
switch# show trunk protocol
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
