Send comments to nx5000-docfeedback@cisco.com
9-19
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcns statistics
show fcns statistics
To display the statistical information for a specified VSAN or for all VSANs, use the show fcns
statistics command.
show fcns statistics [detail] [vsan vsan-id]
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays statistical information for a specified VSAN:
switch# show fcns statistics
detail (Optional) Displays detailed statistics.
vsan vsan-id (Optional) Displays statistics for the specified VSAN ID. The range is 1 to
4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
