Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
9-28
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fdmi
show fdmi
To display the Fabric-Device Management Interface (FDMI) database information, use the show fdmi
command.
show fdmi database [detail [hba-id {hba-id vsan vsan-id} | vsan vsan-id] | vsan vsan-id] |
suppress-updates
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays all HBA management servers:
switch# show fdmi database
The following example displays VSAN1-specific FDMI information:
switch# show fdmi database detail vsan 1
The following example displays details for the specified HBA entry:
switch# show fdmi database detail Hba-id 21:01:00:e0:8b:2a:f6:54 vsan 1
database Displays the FDMI database contents.
detail (Optional) Specifies detailed FDMI information.
hba-id hba-id (Optional) Displays detailed information for the specified HBA entry.
vsan vsan-id (Optional) Specifies FDMI information for the specified VSAN. The range
is 1 to 4093.
suppress-updates Displays the VSANs that are configured to suppress updates.
Release Modification
4.0(0)N1(1a) This command was introduced.