Send comments to nx5000-docfeedback@cisco.com
9-16
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcid-allocation
show fcid-allocation
Use the show fcid allocation command to display the Fibre Channel area list of company IDs.
show fcid-allocation area | company-id-from-wwn wwn [company-id]
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example shows the Fibre Channel area company list of company IDs:
switch# show fcid-allocation area
Fcid area allocation company id info:
00:50:2E
00:50:8B
00:60:B0
00:A0:B8
00:E0:69
00:E0:8B
00:32:23 +
Total company ids: 7
+ - Additional user configured company ids.
* - Explicitly deleted company ids from default list.
Table 9-2 describes the significant fields shown in the display.
area Selects the auto area list of company IDs.
company-id-from-wwn
wwn
Selects company ID from the specified world wide name (WWN).
company-id (Optional) Selects the individual company ID (also know as Organizational
Unit Identifier, or OUI) to display.
Release Modification
4.0(0)N1(1a) This command was introduced.
Table 9-2 show fcid-allocation area company Field Descriptions
Field Description
+ Indicates a company ID added to the default list.
– Indicates a company ID deleted from the default list.
To Next Page
Loading...
