Send comments to nx5000-docfeedback@cisco.com
1-95
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show processes cpu
show processes cpu
To display the CPU utilization information for processes on the device, use the show processes cpu
command.
show processes cpu
Syntax Description This command has no arguments or keywords.
Command Default Displays information for all processes in the local device.
Command Modes EXEC mode
Command History
Examples This example shows how to display the CPU utilization information for the processes:
switch# show processes cpu
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show processes Displays the process information for the switch.
show processes log Displays the contents of the process log.
show processes
memory
Displays the memory allocation information for processes.
To Next Page
Loading...
