Cisco AP775A - Nexus Converged Network Switch 5010 - Show Running-Config Vpc

Send comments to nx5000-docfeedback@cisco.com
10-3
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 10 Vpc Commands
show running-config vpc
show running-config vpc
To display the running configuration information for virtual port channels (vPCs), use the show
running-config vpc command.
show running-config vpc [all]
Syntax Description[
Defaults None
Command Modes Any command mode.
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the running configuration for a vPC:
switch (config)# show running-config vpc
version 4.1(2)
feature vpc
vpc domain 2
role priority 1
system-priority 32667
peer-keepalive destination 10.10.76.52 source 10.10.76.51 udp-port 3200 vrf ma
engagement interval 1000 timeout 5
interface port-channel10
vpc 20
interface port-channel101
vpc 101
interface port-channel200
vpc peer-link
interface port-channel201
vpc 201
Related Commands
all (Optional) Displays running configuration for vPC with defaults.
Release Modification
4.1(3)N1(1) This command was introduced.
Command Description
show vpc brief Displays information about vPCs. If the feature is not enabled, this
command returns an error.