Send comments to nx5000-docfeedback@cisco.com
4-13
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show diagnostic result fex
show diagnostic result fex
To display the results from the diagnostic tests for a Fabric Extender chassis, use the show diagnostic
result fex command.
show diagnostic result fex chassis_ID
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the results from the diagnostic tests for a Fabric Extender:
switch# show diagnostic result fex 101
Related Commands
chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
show fex Displays all configured Fabric Extender chassis connected to the switch.
To Next Page
Loading...
