Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-90
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show license usage
show license usage
To display license usage information, use the show license usage command.
show license usage [PAC KAG E]
Syntax Description
Command Default Displays license usage for the switch.
Command Modes EXEC mode
Command History
Examples This example shows how to display information about the current license usage:
switch# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
FM_SERVER_PKG No - Unused -
ENTERPRISE_PKG Yes - Unused Never -
FC_FEATURES_PKG Yes - In use Never -
--------------------------------------------------------------------------------
Table 1-6 describes the columns used in the show license usage command output.
PACKAGE (Optional) Displays a list of licensed features in use for the specified license
package.
Release Modification
4.0(0)N1(1a) This command was introduced.
Table 1-6 show license usage Columns
Column Description
Feature Name of the license package.
Ins License installation status. "No" indicates that the license is not installed and
"Yes" indicates that the license is installed.
Lic Count License count. "-" indicates that the count is not used for this license
package. A number in this field indicates that number of current usages of
the license by features. This field is not supported.
Status License status. "Unused" indicates that no features that require the license
are enabled. "In use" indicates that one or more features are using the
license.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English