Send comments to nx5000-docfeedback@cisco.com
9-20
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcoe
show fcoe
To display the status of Fibre Channel over Ethernet (FCoE) on the switch, use the show fcoe command.
show fcoe
Syntax Description This command has no other keywords or arguments.
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays the FCoE status:
switch# show fcoe
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
