Cisco AP775A - Nexus Converged Network Switch 5010 - Show Wwn

Send comments to nx5000-docfeedback@cisco.com
9-50
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show wwn
show wwn
To display the status of the WWN configuration, use the show wwn command.
show wwn {status [block-id number] | switch | vsan-wwn}
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays the WWN of the switch:
switch# show wwn switch
The following example displays a user-configured VSAN WWN:
switch# show wwn vsan-wwn
status Displays a summary of WWN usage and alarm status.
block-id number (Optional) Displays WWN usage and alarm status for a block ID. The range
is 34 to 1793.
switch Displays switch WWN.
vsan-wwn Displays all user-configured VSAN WWNs.
Release Modification
4.0(0)N1(1a) This command was introduced.