Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-98
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
logging distribute
logging distribute
To enable Cisco Fabric Services (CFS) distribution for logging, use the logging distribute command.
To disable this feature, use the no form of the command.
logging distribute
no logging distribute
Syntax Description This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the logging commit command.
Examples The following example shows how to change the distribute logging configuration changes:
switch(config)# logging distribute
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
logging commit Commits the logging configuration changes to the active configuration.
show logging Displays logging information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English