Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
6-131
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
ssh server enable
ssh server enable
To enable the Secure Shell (SSH) server, use the ssh server enable command. To disable the SSH server,
use the no form of this command.
ssh server enable
no ssh server enable
Syntax Description This command has no arguments or keywords.
Command Default Enabled.
Command Modes Configuration mode
Command History
Usage Guidelines The switch supports SSH version 2.
Examples This example shows how to enable the SSH server:
switch(config)# ssh server enable
This example shows how to disable the SSH server:
switch(config)# no ssh server enable
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show ssh server Displays the SSH server key information.