Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
5-26
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
show policy-map interface
show policy-map interface
To display the system policy configured on the system and per class statistics, use the show policy-map
interface command.
show policy-map interface [name]
Syntax Description
Command Default None
Command Modes Global configuration.
Command History
Usage Guidelines This command provides per class statistics.
Examples This example shows the per class pause statistics displayed for a default system class:
switch(config)# show policy-map interface ethernet 3/1
Related Commands
name (Optional) Name of the interface.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
policy-map Creates or modifies a policy map.
show policy-map Displays policy maps.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English