Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
7-22
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
ntp distribute
ntp distribute
To enable Cisco Fabric Services (CFS) distribution for Network Time Protocol (NTP), use the ntp
distribute command. To disable this feature, use the no form of the command.
ntp distribute
no ntp distribute
Syntax Description This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the ntp commit command.
Examples The following example shows how to distribute the active NTP configuration to the fabric:
switch(config)# ntp distribute
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ntp commit Commits the NTP configuration changes to the active configuration.
show ntp Displays NTP information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English