Cisco AP775A - Nexus Converged Network Switch 5010 - Fcalias Rename

Send comments to nx5000-docfeedback@cisco.com
8-46
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcalias rename
fcalias rename
To rename a Fibre Channel alias (fcalias), use the fcalias rename command.
fcalias rename current-name new-name vsan vsan-id
no fcalias rename current-name new-name vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to rename an fcalias:
switch(config)# fcalias rename oldalias newalias vsan 10
Related Commands
current-name Specifies the current fcalias name. The maximum length is 64.
new-name Specifies the new fcalias name. The maximum length is 64.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
Release 4.0 This command was introduced.
Command Description
fcalias name Configures fcalias names.
show fcalias Displays fcalias information.