Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-59
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcns proxy-port
fcns proxy-port
To register a name server proxy, use the fcns proxy-port command.
fcns proxy-port wwn-id vsan vsan-id
no fcns proxy-port wwn-id vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Usage Guidelines One name server can be configured to proxy another name server and name server information can be
displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager.
All name server registration requests come from the same port whose parameter is registered or changed.
If it does not, then the request is rejected.
Examples The following example shows configuring a proxy port for VSAN 2:
switch(config)# fcns proxy-port 21:00:00:e0:8b:00:26:d vsan 2
Related Commands
wwn-id Specifies the port WWN, with the format hh:hh:hh:hh:hh:hh:hh:hh.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fcns Displays the name server database and statistical information for a specified
VSAN or for all VSANs.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English