Send comments to nx5000-docfeedback@cisco.com
1-115
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
system startup-config unlock
system startup-config unlock
To unlock the startup configuration file, use the system startup-config unlock command.
system startup-config unlock process-id
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Use the show system internal sysmgr startup-config locks command to display the locks on the startup
configuration file.
Examples This example shows how to unlock the startup-configuration file:
switch# system startup-config unlock 10
process-id Identifier of the process that has locked the startup-configuration file.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
