Send comments to nx5000-docfeedback@cisco.com
9-14
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcdroplatency
show fcdroplatency
To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
show fcdroplatency [network | switch]
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays the configured Fibre Channel latency parameters:
switch# show fcdroplatency
network (Optional) Network latency in milliseconds.
switch (Optional) Switch latency in milliseconds.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
